The CentraPack® consists of predetermined layers of vacuum formed corrugated sheets with a snap-on- positioning system. Each sheet is in opposite mirror position to create a labyrinth function for the water and air contact.

• The open structure of CentraPack® results in low pressure drop and energy consumption.
• In water drizzles down over the corrugations to create a long holdup time in the infill.
• At the same time the uprising air stream gets in turbulence due the same corrugation and intensifies the contact with the water to create a maximum evaporation.
• Standard material is PVC or ABS or PP for special applications.
• PVC and ABS is bonded with standard glue, while PP is bonded either by heat or ultrasonic spot points.

• Supply as preassembled blocks or CKD for assembly at the tower site to save transportation volume.
• Block Sizes (SI-mm/IMP-foot-inch):
  300x300x1200 / 1x1x4 - 300x300x1800 / 1x6x6 – 300x300x2400 / 1x1x8
• Flute size is a half-hexagon 15/⅝ - Height: P2 = 600/2 – P3 = 900/3 – P4 = 1200/4 – P5 = 1500/5
• Thermal Design on request.